| |
FEATURE
- PTL/CC/ 30 is the second generation with high quality and reliability.
- With professional program, use SCM.
- Adds new features and protections using highly advance technology.
- Provides longer battery life and improved system performance
- Sets new standards for reliability and self-diagostics
STANDARD FEATURES
- Versions available: 30W
- 12/24or24/48volt auto-work negative or positive ground
- Microprocessor which is made in USA
- PWM or ON/OFF series battery charging options
- State of charge (SOC) battery regulation
- Battery Ahsetting, boost charging, equalising charging, float charging
- Automatic load reconnection, manual load switch
- Automatic selection of voltage (12/24 V or 24/48V)
- Temperature compensation
- LCD display: SOC as a fuel gauge, all system parameters in digita lvalue, system status as symbols
- Full circuit protection, electronic fuse
- Field adjustable parameters by four buttons
|
 |
INSTALLATION
- Connect wires in orde rindicated1—6
- Use with12V batteries only
- Use with 12V systems only
- Do no texceed Solar and Load rangs (15 A or 20 A ), depending on version
|
| TECHNICALINFORMATION |
| Regulations point |
14.4Volts |
| Low voltage Disconnect |
11.1V Volts |
| Low voltage Reconnect |
13.1Volts |
| Note:all is for 12V system only, use 2x for 24 Volt system |
| Micro controller digital accuracy |
|
| Type of Charging |
Series PWM & state of charge (SOC) 4 Stages: equalization, PWM, Boost and Float, |
| |
temperature compensated charging |
| Electronic protections |
- Short circuit and over current-solar and load Reverse polarity-solar, load
- battery Reverse current at night
- Limits high voltage to protect loads
- Lighting protection
|
| Tropicalizaon |
Conformal coated printed circuit board |
| Terminals |
For wire sizes to 6 mm2 |
| Weight |
200g |
| Dimension |
141.2*95.3mm |
| Self-consumpon |
6mA maximum |
| Temperature |
-35?to55? |
| Enclosure |
IP22 |
| Warranty |
3years |
| Compliance |
CE |
| |
|
| |
|
| |
|
|
|
To discuss
