| |
FEATURE
- Micro controller digital accuracy
- Detects day and night using the PV array
- Suitable for all 12/24 V DC lamp
- Fully Automatic operation
- manual test capability
- Temperature compensation
- Suitable for seal lead acid battery
- 16 field adjustable lighting control options (for option)
- Mian component: Made in USA
Main functions Include
- PWM (Pulse Width Modulation) Charging
- Direct, boost and float auto-charging modes
- High precision control
- LED indication of system working status
- Over load and short circuit protections
- Temperature compensation
- Real time clock and display
- Digital LCD display of parameters
- Optimized control for intelligent adjustment of control parameters
- Based on actual charging/discharging rates
- DC 12V or DC 24V auto work
|
 |
INSTALLATION
- Connect wires in orde rindicated1—6
- Use with12V batteries only
- Use with 12V systems only
- Do no texceed Solar and Load rangs (15 A or 20 A ), depending on version
|
 |
| TECHNICALINFORMATION |
| Regulations point |
14.4Volts |
| Low voltage Disconnect |
11.1V Volts |
| Low voltage Reconnect |
13.1Volts |
| Note:all is for 12V system only, use 2x for 24 Volt system |
| Micro controller digital accuracy |
|
| Type of Charging |
Series PWM & state of charge (SOC) 4 Stages: equalization, PWM, Boost and Float, |
| |
temperature compensated charging |
| Electronic protections |
- Short circuit and over current-solar and load Reverse polarity-solar, load
- battery Reverse current at night
- Limits high voltage to protect loads
- Lighting protection
|
| Tropicalizaon |
Conformal coated printed circuit board |
| Terminals |
For wire sizes to 6 mm2 |
| Weight |
200g |
| Dimension |
141.2*95.3mm |
| Self-consumpon |
6mA maximum |
| Temperature |
-35?to55? |
| Enclosure |
IP22 |
| Warranty |
3years |
| Compliance |
CE |
| |
|
| |
|
| |
|
|
|
To discuss
